Home | JuJu ®

JuJu ® Performance Floor Finish

STM Studio Supplies by Professionals for Professionals

Unit 1, 329 High Street Chatswood NSW 2067 T: 02 9417 3000 F: 02 9417 3111 E: sales@stmstudiosupplies.com

Juju® Performance Floor Finish is an industrial coating that we have adapted to resemble that of dance floor vinyl by adjusting the slip factor.

Juju® Performance Floor Finish works extremely well on most prepared and sealed surfaces and can be used to correct the slipperiness of timber floor surfaces that have been finished in a manner not necessarily suited to dance.

Most often, Juju® Performance Floor Finish is compatible with polyurethane finishes and serves the dual function of toughening them up whilst correcting their slip factor. It important the floor is not too badly worn as the solvent in Juju will react if able to get underneath the existing coating.

Juju does not like 2 pack finishes and will react badly to these.

Juju® Performance Floor Finish works equally well as a general surface finish in high traffic areas in general, but remember it is paint, and whilst tough, it isn’t bulletproof.

A coat of primer prior to application is required. We recommend our own Juju Primer and also supply Bona Prime Intense.

Juju® Stage & Studio Performance Floor Finish is applied with a progression of rollers, starting with 12mm for the primer/1st coat, 9mm for the second coat and 6mm for the final coat.


Juju gives an even better finish when sprayed.

We supply it as a clear product and this means you can retain the wonderful look of timber floor while limiting the damage done from hard foot fall.

If you need to mark up your floor with tape, please consider using Liquid Chalk to avoid potential delamination. Available at art and office supply stores it is a good alternative and won’t lift the finish.

We have found that if you wish to tap dance on a Juju® Performance Floor Finish surface it is best not to put colour underneath. The impact of tap shoes will chip through and expose the floor material. While the floor is still quite useable, it does take on an unattractive speckled appearance.

Where colour is required, use a matt finish acrylic paint. This will act as the first sealer layer in the application process.

Juju® Performance Floor Paint will scuff and mark over time, like conventional vinyl, this is the inevitable patina of a performance floor.

We have developed a Tester Kit and strongly recommend that you purchase this to ensure that you are selecting the best option for your floor and intended use.

Freight Information: Juju is classified as Dangerous Goods for transport, please be aware that delivery times can be longer than anticipated and the carriers add a significant surcharge for this service.

Download the PDF Here for more info & FAQ's

  • Facebook Social Icon
  • Instagram Social Icon
  • Amazon Social Icon
  • LinkedIn Social Icon
  • Spotify Social Icon
  • iTunes Social Icon

© 2019 STM Studio Supplies. All rights reserved.